| Base
board |
| |
|
Click here to enlarge
SI-Prog base: connect it to the PC DB9 serial port.
You can connect any of the following adapter card to the 10
pin connector. The interface sinks current from the PC serial
port, so it doesn't need any external power. The schematics
are also available as a PDF file
|
|
|
| AVR
microcontroller adapter |
|
|
AVR 20 pin (AT90S1200, AT90S2313) connect diagram to base
board
AVR 40 pin (AT90S4414, AT90S8515) connect diagram to base
board
AVR 8 pin (AT90S2323, AT90S2343, ATtiny12) connect diagram
to base board
|
|
|
| ATmega
microcontroller adapter |
| |
|
ATmega (ATmega103/603) connect diagram to base
board
|
| |
| Atmel
core51 microcontroller adapter |
| |
|
AT89S8252/AT89S53 connect diagram to base
board
|
|
|
| PIC
16 adapter |
| |
|
Click here to enlarge
PIC16C84/PIC16F84 connect diagram to base
board
|
| |
| I²CBus
eeprom adapter |
| |
|
I2C Bus eeprom (24Cxx, SDE2516, ...) connect diagram to base
board
|
| |
| Microwire
eeprom adapter |
| |
|
Microwire eeprom (93Cx6) connect diagram to base
board
|
|
|
| SPI
eeprom adapter |
| |
|
SPI eeprom (25xxx, 95xxx) connect diagram to base
board
|
|
|
| SDE2506
eeprom adapter |
| |
|
SDE2506 connect diagram to base board
|
|
|
| NVM3060
eeprom adapter |
| |
|
NVM3060 connect diagram to base board
|
|
|
|
