mail to me

SI Prog

The hardware interface for PonyProg

Last update
22 Jul 1999

If you are interested to purchase the professional SI Prog programmer assembled and tested or only the PCB alone look at www.artek.it Artek Electronic solutions for the price, payment and shipping details.

 Part list
   
  • PonyProg SI PCB v2.0 (double side with solder and silk screen)
    • Main board. Connect it to the serial port of the PC
    • I²CBus adapter board. Connect it to the Main board
    • Other E²PROM adapter board. Connect it to the Main board
    • AVR adapter board. Connect it to the Main board
    • PIC adapter board. Connect it to the Main board
  • Resistors:
    • 2 x 1K
    • 1 x 2K2
    • 6 x 4K7
    • 7 x 10K
    • 1 x 15K
  • Capacitors:
    • 2 x 47uF
    • 12 x 100nF
    • 2 x 27pF
  • Diodes:
    • 3 x 1N4148
    • 3 x Zener 5V1
    • 1 x Zener 13V
  • Other Semiconductors:
    • 4 x BC547 (NPN transistor)
    • 2 x BC557 (PNP transistor)
    • 1 x LM2936Z-5 (low dropout voltage regulator)
  • Xtal:
    • 1 x 4MHz
  • Connectors:
    • 1 x DB9 Female
    • 2 x AMP module 1x2p
    • 1 x AMP module 1x10p
    • 3 x Strip male SIL 3p (jumper)
    • 1 x Strip male SIL 2p (jumper)
  • Sockets:
    • 7 x DIL 8p
    • 1 x DIL 18p
    • 1 x DIL 20p
    • 1 x DIL 28p (300mils wide)
    • 1 x DIL 40p

 

Schematics
   

SI Prog schematic (PDF)
SI Prog mounting plan (PDF)

 

Assembling instructions
   
(Under construction)
  1.